director product manager user guide
A–19
Information and Error Messages
Invalid port number.
Valid ports are (0 -
127, 132-143).
Director 2/140 only.
Port number must be
within the range of
ports for the specific
director model. For
this model, the valid
port numbers are 0 -
127 and 132-143.
Ports 128-131 are not
valid because they
are internal ports and
cannot be connected
to external fiber optic
cables.
Enter a port number within
the correct range.
Invalid port swap.
Port swap selection is
not allowed.
Ensure that each port
selected for swap has not
been previously swapped.
Invalid response
received from
director.
An error occurred at
the director during a
firmware download
operation.
Retry the firmware download
operation. If the problem
persists, contact the next level
of support.
Invalid serial
number for this
feature key.
The serial number
and the feature key
did not match.
Ensure that the feature key
being installed is specifically
for this director serial number.
Invalid UDP port
number.
The specified user
datagram protocol
(UDP) port number is
invalid. The number
must be an integer
from 1 through 65535
inclusive.
Verify and enter a valid UDP
port number from 1 through
655535.
Table A–1: Product Manager Messages (Continued)
Message Description
Action
