Power connector cable
Description
Spare part number
Power connector cable
744362-001
Before removing the power connector cable, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the following components:
a.
Bottom cover (see
Bottom cover on page 29
)
b.
Battery (see
Battery on page 46
)
c.
WLAN module (see
WLAN module on page 32
)
d.
Fan (see
Fan on page 41
)
e.
System board (see
System board on page 48
)
Remove the power connector cable:
1.
Remove the Phillips PM2.0×3.0 screw
(1)
that secures the power connector cable to the computer.
2.
Lift the bracket from atop the connector
(2)
.
3.
Lift the connector straight up and out of the computer
(3)
.
Reverse this procedure to install the power connector cable.
Component replacement procedures
51
