Speaker assembly
Description
Spare part number
Speaker assembly (includes cable)
744377-001
Before removing the speaker assembly, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
Bottom cover on page 29
).
5.
Disconnect the battery.
Remove the speaker assembly:
1.
Disconnect the speaker cable from the system board
(1)
.
2.
Remove the Mylar from atop the wire between the speakers
(2)
.
3.
Remove one Phillips PM2.5×4.0 screw
(3)
from each speaker.
Component replacement procedures
37
