Supplementary Procedures
6-2
Hewlett-Packard VPN Server Appliance SA3110/SA3150/SA3400/SA3450 Installation Guide
Installing or Replacing the X.21 or V.35
Installing or Replacing the X.21 or V.35
Installing or Replacing the X.21 or V.35
Installing or Replacing the X.21 or V.35
Serial Card in the VPN Device
Serial Card in the VPN Device
Serial Card in the VPN Device
Serial Card in the VPN Device
This section explains how to install or replace the X.21 or V.35
serial card in your HP VPN Server Appliance SA3400/SA3450,
and covers the following topics:
•
Hardware requirements
•
Safety precautions
•
Backing up your configuration file
•
Removing the cover of the VPN device
•
Installing/replacing the X.21 or V.35 serial card
•
Closing and securing the cover of the VPN device
•
Reconfiguring the VPN device
•
Restoring the configuration
Hardware
Hardware
Hardware
Hardware
requirements
requirements
requirements
requirements
This section lists the hardware requirements for installing the
X.21 or V.35 serial card into your HP VPN Server Appliance
SA3400/SA3450.
You need the following hardware to install the X.21 or V.35 serial
card into your VPN device:
•
VPN device
•
X.21 or V.35 serial card
•
Phillips screwdriver
•
Disposable grounding wrist strap
Safety
Safety
Safety
Safety
Precautions
Precautions
Precautions
Precautions
WARNING:
WARNING:
WARNING:
WARNING: Turn the power off, disconnect the power cable,
and disconnect all other cables before you perform this proce-
dure. Do not reattach any cables until you replace the cover of
the unit chassis and tighten the cover screws on the chassis.
CAUTION
CAUTION
CAUTION
CAUTION: Attach the disposable grounding wrist strap to your
wrist and an exposed portion of the chassis, as indicated in the
instructions on the wrist strap packaging.
Note:
Note:
Note:
Note: Refer to the
Regulatory Statements document included
with your serial card for detailed information on installing the
serial card.