
Configuring the VPN Client for a Basic Tunnel
Hewlett-Packard VPN Server Appliance SA3110/SA3150/SA3400/SA3450 Installation Guide
5-5
Configuring the VPN Client for a Basic
Configuring the VPN Client for a Basic
Configuring the VPN Client for a Basic
Configuring the VPN Client for a Basic
Tunnel
Tunnel
Tunnel
Tunnel
In this section, you configure the VPN Client software for a basic
tunnel.
Steps
Steps
Steps
Steps
To configure a basic tunnel:
1.
In the Start menu, select Programs, then HP SA3000 VPN
Software, then VPN Client.
The VPN Client Logon window appears.
The first time you run VPN Client after installing it on your
computer, you are prompted for a user name and password.
2.
Enter your user name and password in the window that
appears.
Note:
Note:
Note:
Note: The password is one that you make up, and is used
only for the purpose of running the VPN Client the first time.
3.
In the Tunnels menu, select New.
The General Tab appears.
Note:
Note:
Note:
Note: Set up your authentication method now, unless you
are using a SecurID or RADIUS authenticated security pro-
file.
4.
Enter the tunnel name.
This name is a unique descriptor that you choose. For
example, QA Lab Tunnel.
5.
Enter a group name, if necessary.
This group name is provided by your network administrator.
6.
Select the adapter (Dial-up networking, Ethernet, and so on)
that you want the tunnel to apply to.
7.
Select the type of tunnel you want to use.
You can choose from a Shiva Smart Tunnel (SST) or an IPSec
tunnel.
8.
Click Add to add a VPN device/Tunnel Server name and IP
address.