
Saving New Device Information to a Configuration File
Hewlett-Packard VPN Server Appliance SA3110/SA3150/SA3400/SA3450 Installation Guide
4-7
Saving New Device Information to a
Saving New Device Information to a
Saving New Device Information to a
Saving New Device Information to a
Configuration File
Configuration File
Configuration File
Configuration File
In this section, you save the configuration information you
entered in the preceding section, "Adding a VPN Device With
VPN Manager," to a file.
Steps
Steps
Steps
Steps
To save your configuration information to a file:
1.
In the Configure menu, select Manager, then select
Password.
The VPN Manager window appears.
2.
Enter and reenter the password to confirm it.
Note:
Note:
Note:
Note: This password is for the device list only and is not
related to the password you entered when you initially ran
the Setup Script (Chapter 3, "Setting Up a Basic Routing
Mode Configuration on a New Device").
It is also unrelated to the password you entered in the
preceding section, "Adding a VPN Device With VPN
Manager," when you created a .imn extension file.
For more complete information about the passwords used
with your VPN device, see VPN Manager online Help, under
"passwords: about passwords."
3.
Click OK.
You return to the VPN Manager main window.
4.
In the File menu, select Save As.
The Save As window appears.
5.
Enter a file name.
6.
Click Save.
The file is available immediately for use.
Next Step
Next Step
Next Step
Next Step
Overview to Installing HP SA3000 Series VPN Client (page 5-1)