Installing HP SA3000 Series VPN Client
5-4
Hewlett-Packard VPN Server Appliance SA3110/SA3150/SA3400/SA3450 Installation Guide
the VPN Client to make available by accepting the default
value of 2 or entering another number of tunnels you want.
The maximum number of tunnels is four.
13. Select Next to continue.
The User Configuration Files window appears.
14. Specify the location where you want to save future User
Configuration files. Click Browse to select an alternate
location.
15. Select Next to continue.
The VPN Client software is installed on your computer.
After the VPN Client is installed, the following question
appears:
Do you want the VPN Client to start automatically every time
Windows restarts (recommended)?
16. Select Yes to have the VPN Client start each time you reboot
Windows or select No to have manual control over starting
the VPN Client.
Note:
Note:
Note:
Note: You cannot undo this option once the VPN Client is
installed. To undo this operation, you must reinstall the VPN
Client. Reinstalling the VPN Client does not remove any
configuration parameters you have saved to file.
You are asked whether you want a shortcut for the VPN
Client placed on the desktop.
17. Select Yes to create a shortcut or select No to continue
without creating a shortcut. Follow the directions in the
window to complete the installation.
Note:
Note:
Note:
Note: You must restart your computer after you install the
VPN Client. If you do not restart your computer, you cannot
use the VPN Client as the virtual network interface card.
Next Step
Next Step
Next Step
Next Step
Configuring the VPN Client Software for a Basic Tunnel (page 5-
5)