Installing HP SA3000 Series VPN Manager
4-4
Hewlett-Packard VPN Server Appliance SA3110/SA3150/SA3400/SA3450 Installation Guide
Adding a VPN Device With VPN Manager
Adding a VPN Device With VPN Manager
Adding a VPN Device With VPN Manager
Adding a VPN Device With VPN Manager
In this section, you add your VPN device, so that VPN Manager
knows the device is accessible.
Steps
Steps
Steps
Steps
To add your device:
1.
Open the VPN Manager software.
2.
In the File Menu, select Add Device.
The Add Device window appears.
3.
Enter the IP address of the device.
Note:
Note:
Note:
Note: Because a VPN device can have many IP addresses,
you must enter an IP address on the same local network as
VPN Manager, that is, a reachable address.
4.
In the Host Name field, enter the Host Name of the device.
By default, VPN Manager reads the host name that you
already configured on the device through the console
window. If you do not want to change the host name, leave
this field blank. If you do change the host name, click
Commit to update the configuration.
5.
In the Folder field, select the device list/network layout in
which you want the device information to reside.
If you select All Devices, the device is placed in the All
Devices folder.
Note:
Note:
Note:
Note: After you add a device, you can create a new device
list/network layout folder by selecting Add Folder in the File
menu.
6.
In the User Name field, enter
admin
.
This is the default user name from the setup script, and is
required. Note that it is case sensitive.
Note:
Note:
Note:
Note: You can change the default user name by creating
other Manager user names in the General tab.
7.
In the Password field, enter
password
.
This is the same administrator password that you set when
you ran the setup script in the basic routing mode
configuration. (See "Setting Up a Basic Routing Mode
