HP ProLiant XL270d Gen9 Скачать руководство пользователя страница 94 | Manualshive

Страница: 94 / 126

background image

iLO RESTful API support for UEFI

The ProLiant Gen9 servers include support for a UEFI-compliant System BIOS, along with UEFI System
Utilities and Embedded UEFI Shell preboot environments. ProLiant Gen9 servers also support configuring
the UEFI BIOS settings using the iLO RESTful API, a management interface that server management
tools can use to perform configuration, inventory, and monitoring of a ProLiant server. The iLO RESTful
API uses basic HTTPS operations (GET, PUT, POST, DELETE, and PATCH) to submit or return JSON-
formatted data with iLO web server.

For more information about the iLO RESTful API and the RESTful Interface Tool, see the

Packard Enterprise website

Re-entering the server serial number and product ID

After you replace the system board, you must re-enter the server serial number and the product ID.

1.

During the server startup sequence, press the

F9

key to access UEFI System Utilities.

2.

Select the

System Configuration

>

BIOS/Platform Configuration (RBSU)

>

Advanced Options

>

Advanced System ROM Options

>

Serial Number

, and then press the

Enter

key.

3.

Enter the serial number and press the

Enter

key. The following message appears:

The serial

number should only be modified by qualified service personnel. This value
should always match the serial number located on the chassis.

4.

To clear the warning, press the

Enter

key.

5.

Enter the serial number and press the

Enter

key.

6.

Select

Product ID

. The following warning appears:

Warning: The Product ID should ONLY be

modified by qualified service personnel. This value should always match the
Product ID located on the chassis.

7.

Enter the product ID and press the

Enter

key.

8.

To confirm exiting System Utilities, press the

F10

key. The server automatically reboots.

HPE ProLiant Pre-boot Health Summary

If the server will not start up, you can use iLO to display diagnostic information on an external monitor.
This feature is supported on server s that support external video and have a UID button or an SUV
connector. When power is available to the server but the server is not powered on, iLO runs on auxiliary
power and can take control of the server video adapter to display the HPE ProLiant Pre-boot Health
Summary.

For additional information, see the following documents:

•

iLO 4 User Guide

Hewlett Packard Enterprise website

• ProLiant Gen9 Troubleshooting Guide, Volume I: Troubleshooting — See

Troubleshooting

Insight Diagnostics

The Insight Diagnostics is a proactive server management tool, available in both offline and online
versions. The tool provides diagnostics and troubleshooting capabilities to assist IT administrators who
verify server installations, troubleshoot problems, and perform repair validation.

94

iLO RESTful API support for UEFI

«
...
92
93
94
95
96
...
»

Содержание ProLiant XL270d Gen9































































































































Отзывы:

Нет отзывов

Похожие инструкции для ProLiant XL270d Gen9

Бренд: Premio Страницы: 3

Бренд: Velleman Страницы: 17

Бренд: Rohde & Schwarz Страницы: 126

Бренд: LiveU Страницы: 14

Бренд: TYAN Страницы: 70

SuperServer 5037C-i

Бренд: Supermicro Страницы: 88

SuperServer 1019D-FRN8TP

Бренд: Supermicro Страницы: 126

Бренд: IBM Страницы: 75

AlphaServer ES47

Бренд: HP Страницы: 76

AlphaServer GS80

Бренд: HP Страницы: 88

Бренд: HP Страницы: 39

16/18-Port Cable Management Kit

Бренд: HP Страницы: 14

Бренд: HP Страницы: 49

AlphaServer ES47

Бренд: HP Страницы: 152

AlphaStation DS20

Бренд: HP Страницы: 15

AlphaServer ES45

Бренд: HP Страницы: 38

AB500A - Integrated Lights-Out Advanced

Бренд: HP Страницы: 43

AlphaServer GS1280 Systems

Бренд: HP Страницы: 59

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды