HP ProLiant DL380 G5 DPSS Скачать руководство пользователя страница 66

Страница: 66 / 104

Removal and replacement procedures 66

Remove the expansion board.

CAUTION:

To prevent improper cooling and thermal damage, do not operate the server

unless all PCI slots have either an expansion slot cover or an expansion board installed.

To replace the component, reverse the removal procedure.

Battery

If the server no longer automatically displays the correct date and time, you may need to replace the

battery that provides power to the real-time clock.

WARNING:

The computer contains an internal lithium manganese dioxide, a vanadium

pentoxide, or an alkaline battery pack. A risk of fire and burns exists if the battery pack is not
properly handled. To reduce the risk of personal injury:

•

Do not attempt to recharge the battery.

•

Do not expose the battery to temperatures higher than 60°C (140°F).

•

Do not disassemble, crush, puncture, short external contacts, or dispose of in fire or water.

•

Replace only with the spare designated for this product.

To remove the component:

Power down the server (on page

Extend or remove the server from the rack ("

Remove the server from the rack

" on page

Remove the access panel ("

Access panel

" on page

Remove the PCI riser cage ("

PCI riser cage

" on page

CAUTION:

To prevent damage to the server or expansion boards, power down the server

and remove all AC power cords before removing or installing the PCI riser cage.

Содержание ProLiant DL380 G5 DPSS









































































































Результаты поиска

Содержание ProLiant DL380 G5 DPSS

Отзывы:

Похожие инструкции для ProLiant DL380 G5 DPSS

Бренды по названию

Популярные бренды

HP ProLiant DL380 G5 DPSS, Руководство по техническому обслуживанию и ремонту

Результаты поиска

Содержание ProLiant DL380 G5 DPSS

Отзывы:

Похожие инструкции для ProLiant DL380 G5 DPSS

Бренды по названию

Популярные бренды