HP Array Configuration Utility 47
•
Physical drive error logs
ACU Diagnostics never collects information about the data content of logical drives. The diagnostic report
does not collect or include the following:
•
File system types, contents, or status
•
Partition types, sizes, or layout
•
Software RAID information
•
Operating system device names or mount points
Performing a Diagnostics task
1.
Open ACU.
For more information, see "Using the ACU GUI (on page
30
)."
If ACU is already open, click the
Diagnostics/SmartSSD
tab.
The
Diagnostics/SmartSSD
screen appears with the following selections:
o
View SmartSSD Wear Gauge Report
o
Generate SmartSSD Wear Gauge Report
o
Run Array Diagnostic Reports
For this example, use the diagnostic reports selection.
2.
Select
Run Array Diagnostic Reports
.
The array diagnostic report screen appears.
3.
Select a device or devices from the
Report Contents
panel.
The
Available Tasks
panel appears. For more information, see "Diagnostics tasks (on page
46
)."
