HP Array Configuration Utility 41
For certain tasks, the controller must have SAAP activated by a registered license key. For more information,
see "About SAAP (on page
8
)."
When a controller or device is selected, the tasks that appear are a subset of the total number of possible
tasks for the selected item. ACU lists or omits tasks based on the controller model and configuration. For
example, if the selected controller has no unassigned physical drives, Create Array is not an available task.
The following table lists all the possible tasks for every type of item.
Item
Tasks
Controller
Advanced Controller Settings* **
Array Accelerator Settings
Clear Configuration
Controller Settings
Create Array
Disable Standby Controller
Manage License Keys*
More Information
Physical Drive Write Cache Settings
Redundancy Settings*
View Status Alerts
Array
Create Array
Create Logical Drive
Delete
Expand Array
More Information
Move Array**
Re-Mirror Array**
Shrink Array**
Spare Management
Split Mirrored Array**
View Status Alerts
Logical drive
Create Logical Drive
Delete
Erase Drive* **
Extend Logical Drive
Migrate RAID/Stripe Size
Move Logical Drive* **
More Information
Re-enable Failed Logical Drive
View Status Alerts
Unused space
Create Logical Drive
More Information
Physical drive
Erase Drive**
View Status Alerts
Unassigned
drives
Create Array
More Information
*This task is not available on all controller models.
**This task requires a controller with SAAP activated by a registered license key or a controller where SAAP functionality
is standard. See "About SAAP (on page
8
)."
Configuring a controller
1.
Open ACU.
