HP Online Array Configuration Utility for NetWare 16
•
The main panel is the Logical Configuration View panel, which shows the selected controller and a tree
of all arrays, logical drives, and unassigned physical drives that are connected to the controller. (To
toggle to the physical configuration view, press the
Tab
key.)
•
The secondary panel displays a menu of configuration options ("
Menu options in CPQONLIN
" on page
16
) for the item that is highlighted in the Logical Configuration View panel.
To begin the configuration process, scroll the highlight to the item listed in the main panel that you want to
configure and then press the
Enter
key. The highlight jumps to the secondary panel, where you can continue
the configuration process using the same method (scroll to a menu item, and then press the
Enter
key). To
return the highlight to the previous panel at any time in the configuration process, press the
Esc
key.
For help, press the
F1
key.
Detailed procedures for common tasks are described in "Typical manual configuration procedures (on page
17
)."
Menu options in CPQONLIN
Menu options are visible only if they are applicable. For example, if you highlight the controller in the Logical
Configuration View panel and the controller does not have any unassigned physical drives, the Controller
Options menu does not display the Create New Array menu option.
•
Controller Options menu (appears in the secondary panel when the controller is highlighted in the
Logical Configuration View panel)
Menu option
Result of selecting the option
Controller Settings A new panel opens, displaying settings for three options:
Rebuild Priority, Expand Priority, and Accelerator Ratio.
