HP Array Configuration Utility 44
4.
Select the settings or configuration options for the device.
5.
Use the Next and Back buttons to navigate multiple screens of options.
6.
Click
Save
or
OK
.
Installing a license key with ACU
If the controller supports SAAP, you can use ACU to install the license key and activate SAAP functionality.
For more information, see "About SAAP (on page
8
)."
To install a license key:
1.
Open ACU.
For more information, see "Using the ACU GUI (on page
30
)."
If ACU is already open, click the
Configuration
tab.
2.
Select a controller from the Controller/Device menu.
The System Status, Systems And Devices, and Available Tasks panels appear.
3.
In the Available Tasks panel, click
Manage License Keys
.
Specific license key tasks appear. A complete list of existing license keys also appears.
4.
Click
Add License Key
.
5.
Enter the license key number.
6.
Click
Save
.
Changing the Spare Activation Mode
The spare activation mode feature enables the controller firmware to activate a spare drive under the
following conditions:
•
When a data drive reports a predictive failure (SMART) status
•
When a data drive fails; this mode is the default.
In normal operations, and for older controllers, the firmware starts rebuilding a spare drive only when a data
drive fails. With the predictive failure activation mode, rebuilding can begin before the drive fails, reducing
the likelihood of data loss that could occur if an additional drive fails.
To change the Spare Activation Mode:
1.
Open ACU.
For more information, see "Using the ACU GUI (on page
30
)."
If ACU is already open, click the
Configuration
tab.
2.
Select a controller from the
Controller/Device
menu.
The
System Status
,
Systems And Devices
, and
Available Tasks
panels appear.
3.
In the
Available Tasks
panel, click
Modify Spare Activation Mode
.
4.
From the menu, select one of the following modes:
o
Failure Spare Activation
o
Predictive Spare Activation
5.
Click
Save
.
