HP Array Configuration Utility 42
For more information, see "Using the ACU GUI (on page
30
)."
2.
Select a controller from the
Controller/Device
menu.
The
Configuration
screen appears.
3.
Configure the controller:
o
To configure manually, see "Performing a Configuration task (on page
42
)."
o
To configure with a wizard, see "Using Wizards (on page
48
)" or "Using Express Configuration (on
page
50
)."
4.
When prompted, save the configuration.
5.
Do one of the following:
o
Configure an additional controller. Repeat steps 3 through 5.
o
Click
Exit ACU
.
Performing a Configuration task
1.
Open ACU.
For more information, see "Using the ACU GUI (on page
30
)."
If ACU is already open, click the
Configuration
tab.
2.
Select a device from the Controller/Device menu.
