HP ProLiant DL180 Gen9, Руководство пользователя

Страница: 52 / 169

Hardware options installation 52
2.
Remove all power:
a.
Disconnect each power cord from the power source.
b.
Disconnect each power cord from the server.
3.
Do one of the following:
o
Extend the server from the rack (on page 20 ).
o
Remove the server from the rack (on page 22 ).
4.
If installed, remove the security bezel (" Remove the security bezel (optional) " on page 23 ).
5.
Remove the access panel (on page 24 ).
6.
Use a flathead screwdriver to carefully pry the blanks from the box 1 drive bays 1-4.
Retain the blanks for future use.
7.
Remove the primary PCI riser cage (" Remove the PCI riser cages " on page 26 ).
8.
Remove the air baffle (on page 29 ).
9.
Disconnect the fan cables.