HP ProLiant DL180 Gen9, Руководство пользователя

Страница: 30 / 169

Operations 30
To remove the component:
1.
Power down the server (on page 20 ).
2.
Remove all power:
a.
Disconnect each power cord from the power source.
b.
Disconnect each power cord from the server.
3.
Do one of the following:
o
Extend the server from the rack (on page 20 ).
o
Remove the server from the rack (on page 22 ).
4.
Remove the access panel (on page 24 ).
5.
If a full-length expansion board is installed on a PCI riser cage, remove the riser cage (" Remove the PCI
riser cages " on page 26 ).
6.
Remove the air baffle.
Install the air baffle
CAUTION: For proper cooling, do not operate the server without the access panel, baffles,
expansion slot covers, or blanks installed. If the server supports hot-plug components, minimize
the amount of time the access panel is open.