Hardware options installation 66
Controller options
The server ships with an embedded HP Dynamic Smart Array B140i Controller. For more information about
the controller and its features, see the
HP Dynamic Smart Array B140i RAID Controller User Guide
on the HP
website (
http://www.hp.com/go/smartstorage/docs
).
Upgrade options exist for an integrated array controller. For a list of supported options, see the product
QuickSpecs on the HP website (
http://www.hp.com/go/qs
).
To configure arrays, see the
HP Smart Storage Administrator User Guide
on the HP website
(
http://www.hp.com/go/smartstorage/docs
).
The server supports FBWC. FBWC consists of a cache module and an HP Smart Storage Battery Pack. The
DDR cache module buffers and stores data being written by an integrated Gen9 P-series Smart Array
Controller.
This server supports the 96-W HP Smart Storage Battery Pack. This battery pack can support up to 24
devices. Devices in this context refer to the HP Smart Array Controller or NVDIMM associated with the cache
module.
The battery pack might have a low charge when installed. If the battery does have low charge, a POST error
message appears when the server is powered up, indicating that the battery pack is temporarily disabled.
No action is necessary. The internal circuitry automatically recharges the batteries and enables the battery
pack. When the system is powered on this process might take approximately 2 hours.
If a system power failure occurs, a fully charged battery pack provides power for up to 150 seconds. During
that interval, the controller transfers the cached data from DDR memory to flash memory, where the data
remains indefinitely or until a controller retrieves the data. The data protection and the time limit also apply
if a power outage occurs. When power is restored to the system, an initialization process writes the
preserved data to the storage drives.
CAUTION:
The cache module connector does not use the industry-standard DDR3 mini-DIMMs.
Do not use the controller with cache modules designed for other controller models, because the
controller can malfunction and you can lose data. Also, do not transfer this cache module to an
unsupported controller model, because you can lose data.
CAUTION:
To prevent a server malfunction or damage to the equipment, do not add or remove
the battery pack while an array capacity expansion, RAID level migration, or stripe size migration
is in progress.
CAUTION:
After the server is powered down, wait for 30 seconds, and then check the amber LED
before unplugging the cable from the cache module. If the amber LED flashes after 30 seconds,
do not remove the cable from the cache module. The cache module is backing up data. Data will
be lost if the cable is detached when the amber LED is still flashing.
Storage controller installation guidelines
To maintain optimal thermal conditions when installing an HP P-series Smart Array Controller to support drive
configurations that have 12 or more drives, HP recommends the following guidelines:
•
When installing only one controller board, install the board in slot 2 of either the 2-slot or the 3-slot PCI
riser cage assembly installed in the primary PCIe riser location ("
PCI riser cage assembly options
" on
page
93
).
Содержание ProLiant DL180 Gen9
