Removal and replacement procedures 60
b.
Disconnect each power cord from the server.
3.
Do one of the following:
o
Extend the server from the rack (on page
28
).
o
Remove the server from the rack (on page
30
).
4.
Remove the access panel ("
Access panel
" on page
37
).
5.
Remove the PCI riser cage ("
Remove the PCI riser cages
" on page
31
).
6.
Disconnect any internal cables that are connected to the expansion board.
7.
If you are removing a storage controller board with a cache module installed, remove the cache module
("
FBWC module
" on page
44
).
8.
Remove the expansion board.
To replace the component, reverse the removal procedure.
Two-slot and three-slot PCIe riser boards
WARNING:
To reduce the risk of personal injury from hot surfaces, allow the drives and the
internal system components to cool before touching them.
CAUTION:
To prevent damage to electrical components, take the appropriate anti-static
precautions before beginning any installation, removal, or replacement procedure. Improper
grounding can cause electrostatic discharge.
To remove the component:
1.
Power down the server (on page
27
).
2.
Remove all power:
a.
Disconnect each power cord from the power source.
b.
Disconnect each power cord from the server.
3.
Do one of the following:
o
Extend the server from the rack (on page
28
).
o
Remove the server from the rack (on page
30
).
4.
Remove the access panel ("
Access panel
" on page
37
).
5.
Remove the PCI riser cage ("
Remove the PCI riser cages
" on page
31
).
Содержание ProLiant DL180 Gen9
