First-Time Configuration
Changing the Default User Password
The user login has limited control of the GbE2 Interconnect Switch. Through a user account,
you can view GbE2 Interconnect Switch information and statistics, but you cannot make
configuration changes.
The default password for the user account is
user.
This password cannot be changed from the
user account. Only the administrator has the ability to change passwords, as shown in the
following procedure.
1. Connect to the GbE2 Interconnect Switch and log in using the
admin
password.
2. From
the
Main Menu,
use the following command to access the
Configuration Menu:
Main#
cfg
3. From
the
Configuration Menu,
use the following command to select the
System Menu:
>> Configuration#
sys
4. Enter the following command to set the user password:
System#
user/usrpw
5. Enter the current administrator password at the prompt.
Only the administrator can change the user password. Entering the administrator
password confirms your authority.
Changing USER password; validation required...
Enter current administrator password:
6. Enter the new user password at the prompt:
Enter new user password:
7. Enter the new user password, again, at the prompt:
Re-enter new user password:
8. Apply and save your changes:
System#
apply
System#
save
HP ProLiant BL p-Class GbE2 Interconnect Switch Command Reference Guide
3-13
HP CONFIDENTIAL
Codename: Strawberry Part Number: 331404-001 Last Saved On: 7/17/03 12:50 PM
