HP ProLiant BL p-Class GbE2, Справочник по командам

Страница: 19 / 126

Menu Basics
Table 2-1: Global Commands
continued
Command Action
exit or quit Exits from the command line interface and logs out.
ping
Verifies station-to-station connectivity across the network. The format is:
ping < host name > | < IP address > [ ( number of tries )> [ msec delay ]]
•
IP address is the hostname or IP address of the device.
•
number of tries (optional) is the number of attempts (1-32).
•
msec delay (optional) is the number of milliseconds between attempts.
traceroute
Identifies the route used for station-to-station connectivity across the
network. The format is:
traceroute < host name > | < IP address > [< max-hops >
[ msec delay ]]
•
IP address is the hostname or IP address of the target station.
•
max-hops (optional) is the maximum distance to trace (1-16 devices)
•
msec delay (optional) is the number of milliseconds to wait for the
response.
pwd Displays the command path used to reach the current menu.
verbose n
Sets the level of information displayed on the screen:
•
0 = Quiet: Nothing displays except errors, not even prompts.
•
1 = Normal: Prompts and requested output are shown, but no menus.
•
2 = Verbose: Everything is shown. This is the default.
•
When used without a value, the current setting is displayed.
telnet This command is used to Telnet out of the GbE2 Interconnect Switch. The
format is:
telnet < hostname > | < IP address > [ port ]
history Displays the history of the last ten commands.
pushd Remembers the current location in the directory of menu commands.
popd Returns to the last pushd location.
2-4 HP ProLiant BL p-Class GbE2 Interconnect Switch Command Reference Guide
HP CONFIDENTIAL Codename: Strawberry Part Number: 331404-001 Last Saved On: 7/17/03 12:48 PM