Figure 97 Cluster Groups page
2.
Click
Create
to create a new group.
3.
Specify the properties for the new cluster group, and then click
OK
to create the cluster group.
Adding new storage to a cluster
Present the new storage to one node in the cluster. This can be accomplished through selective storage
presentation or through SAN switch zoning.
1.
Open the WebUI and navigate to the
Disks
tab.
2.
Click the
Disks
subtab.
3.
Select the disk that needs to be configured from the list of available disks, and then click
Create
New Volume
.
4.
Follow the steps in the wizard to create the new volume. The LUN needs to be configured as a
basic disk with a NTFS file system.
NOTE:
If the disk does not appear in the list of available disks on the Manage Disks page then click Rescan
to rescan for new disks and refresh the page.
5.
Open the WebUI and click the
Cluster
tab.
6.
Follow the procedures listed below to create a physical disk resource.
See the Cluster Storage Guide on the WebUI
Cluster
tab for detailed information on adding
storage elements into the cluster.
HP ProLiant Storage Server administration guide
191
Содержание ProLiant 300 Series
