Focus can only be given to a partition on the selected disk. When a partition has focus, the related
volume (if any) also has focus. When a volume has focus, the related disk and partition also have focus if
the volume maps to a single specific partition. If this is not the case, focus on the disk and partition is lost.
Table 10 Common DiskPart commands
Command
Description
add disk
Mirrors the simple volume with focus to the specified disk.
assign
Assigns a drive letter or mount point to the volume with focus.
convert basic
Converts an empty dynamic disk to a basic disk.
convert dynamic
Converts a basic disk into a dynamic disk. Any existing partitions on the
disk become simple volumes.
create volume simple
Creates a simple volume. After creating the volume, the focus automatically
shifts to the new volume.
exit
Exits the DiskPart command interpreter.
help
Displays a list of the available commands.
list disk
Displays a list of disks and information about them, such as their size, amount
of available free space, whether the disk is a basic or dynamic disk, and
whether the disk uses the master boot record (MBR) or GUID partition table.
The disk marked with an asterisk (*) has focus.
list partition
Displays the partitions listed in the partition table of the current disk. On
dynamic disks these partitions may not correspond to the dynamic volumes
on the disk. This discrepancy occurs because dynamic disks contain entries
in the partition table for the system volume or boot volume (if present on the
disk). They also contain a partition that occupies the remainder of the disk in
order to reserve the space for use by dynamic volumes.
list volume
Displays a list of basic and dynamic volumes on all disks.
rem
Provides a way to add comments to a script.
retain
Prepares an existing dynamic simple volume to be used as a boot or system
volume.
select disk
Selects the specified disk and shifts the focus to it.
NOTE:
The Data Volume is configured by default as a RAID-5 volume across all four disks and is formatted as
NFTS with a 16K allocation unit size.
For a complete list of DiskPart commands, go to the Windows Storage Server 2003 Desktop on the
storage server via Remote Desktop and select
Start
>
Help and Support
, search on DiskPart.
Example of using DiskPart
The following example shows how to configure a volume on the storage server.
In the cmd window, type:
c:\>diskpart
DISKPART>Rescan
DISKPART>select disk 2
HP ProLiant Storage Server administration guide
59
Содержание ProLiant 300 Series
