9.
In the Add Nodes Wizard window, enter the password for the cluster account, and then click
Next
.
10.
The next screen displays a proposed cluster configuration summary. Confirm that all settings are
correct, and then click
Next
to join the cluster.
11.
Click
Next
, and then
Finish
to complete the cluster wizard.
After the node has successfully joined the cluster present all additional storage LUNS to the node. Please
refer to the Cluster Storage Guide located in the
Cluster
tab for additional information on adding and
configuring additional physical disk resources.
Geographically dispersed clusters
Cluster nodes can be geographically dispersed to provide an additional layer of fault tolerance.
Geographically dispersed clusters are also referred to as stretched clusters.
The following rules must be followed with geographically dispersed clusters:
•
A VLAN connection with latency of 500 milliseconds or less ensures that cluster consistency can
be maintained. If the VLAN latency is over 500 milliseconds, the cluster consistency cannot
be easily maintained.
•
All nodes must be on the same subnet.
HP ProLiant Storage Server software updates
After cluster installation has been completed, run the cluster update tool located in the Cluster Installation
Guide in the WebUI. The Cluster Installation Guide is located in the
Cluster
tab. This must be done after
the cluster installation is complete. It is necessary to run this tool on all cluster nodes.
Figure 96 Cluster update tool
This completes the initial cluster installation.
186
Cluster Administration
Содержание ProLiant 300 Series
