Figure 59 DFS Properties page, General tab
4.
On the
General
tab, select the default settings that are desired when creating a shared directory.
• To set the default to publish the share to the local DFS root, select
Publish new shares
to the local DFS root
.
• To set the default to publish the share to another DFS root, select
Publish new shares to
a domain DFS root or a stand-alone DFS root on a different server
. In the DFS
root box, type the path of the default DFS root.
• To not publish the share to a DFS root, select
Do not publish new shares to a DFS root
.
5.
Click
OK
.
Creating a local DFS root
The WebUI can be only be used to create a single, local stand-alone DFS root on the server as mentioned
previous. To create a domain DFS root use the DFS administrative tool. For more information about DFS
root types refer to the section above entitled “
.”
To create a local stand-alone DFS root:
1.
From the WebUI, click
Shares
.
2.
Click
Sharing Protocols
.
3.
Click
DFS
, and then click
Properties
.
110
Folder, Printer, and Share Management
Содержание ProLiant 300 Series
