HP PROCURVE 2910AL, Руководство по обеспечению безопасности доступа

Страница: 390 / 594

Configuring Advanced Threat Protection
Introduction
Introduction
As your network expands to include an increasing number of mobile devices,
continuous Internet access, and new classes of users (such as partners,
temporary employees, and visitors), additional protection from attacks
launched from both inside and outside your internal network is often neces­
sary.
Advanced threat protection can detect port scans and hackers who try to
access a port or the switch itself. The following software features provide
advanced threat protection and are described in this chapter:
■ DHCP snooping: Protects your network from common DHCP attacks,
such as:
• Address spoofing in which an invalid IP address or network gateway
address is assigned by a rogue DHCP server.
• Address exhaustion of available addresses in the network DHCP
server, caused by repeated attacker access to the network and numer­
ous IP address requests.
■ Dynamic ARP protection: Protects your network from ARP cache
poisoning as in the following cases:
• An unauthorized device forges an illegitimate ARP response and
network devices use the response to update their ARP caches.
• A denial-of-service (DoS) attack from unsolicited ARP responses
changes the network gateway IP address so that outgoing traffic is
prevented from leaving the network and overwhelms network
devices.
■ Instrumentation monitor: Protects your network from a variety of
other common attacks besides DHCP and ARP attacks, including:
• Attempts at a port scan to expose a vulnerability in the switch,
indicated by an excessive number of packets sent to closed TCP/UDP
ports
• Attempts to fill all IP address entries in the switch’s forwarding table
and cause legitimate traffic to be dropped, indicated by an increased
number of learned IP destination addresses
• Attempts to spread viruses, indicated by an increased number of ARP
request packets
10-2