HP ProBook 430 G2 Скачать руководство пользователя страница 86

Страница: 86 / 98

●

To specify a boot device from the Express Boot menu, select your preference within the allotted

time, and then press

enter

●

To prevent the computer from defaulting to the current MultiBoot setting, press any key before

the allotted time expires. The computer will not start until you select a boot device and press

enter

●

To allow the computer to start according to the current MultiBoot settings, wait for the allotted

time to expire.

Using HP PC Hardware Diagnostics (UEFI)

HP PC Hardware Diagnostics is a Unified Extensible Firmware Interface (UEFI) that allows you to run

diagnostic tests to determine whether the computer hardware is functioning properly. The tool runs

outside the operating system so that it can isolate hardware failures from issues that are caused by

the operating system or other software components.
To start HP PC Hardware Diagnostics UEFI:

Turn on or restart the computer, quickly press

esc

, and then press

The BIOS searches three places for the diagnostic tools, in the following order:
a.

Connected USB drive

NOTE:

To download the HP PC Hardware Diagnostics (UEFI) tool to a USB drive, see

Downloading HP PC Hardware Diagnostics (UEFI) to a USB device on page 76

Hard drive

BIOS

When the diagnostic tool opens, use the keyboard arrow keys to select the type of diagnostic

test you want to run, and then follow the on-screen instructions.

NOTE:

If you need to stop a diagnostic test, press

esc

Downloading HP PC Hardware Diagnostics (UEFI) to a USB device

NOTE:

Instructions for downloading HP PC Hardware Diagnostics (UEFI) are provided in English

only.

Go to

http://www.hp.com

Point to Support, located at the top of the page, and then click Download Drivers.

In the text box, enter the product name, and then click Go.
– or –
Click Find Now to let HP automatically detect your product.

Select your computer model, and then select your operating system.

In the Diagnostic section, click HP UEFI Support Environment.
– or –
Click Download, and then select Run.

76 Chapter 12 Computer Setup (BIOS), MultiBoot, and HP PC Hardware Diagnostics (UEFI)

Содержание ProBook 430 G2



































































































Результаты поиска

Содержание ProBook 430 G2

Отзывы:

Похожие инструкции для ProBook 430 G2

Бренды по названию

Популярные бренды

HP ProBook 430 G2, Руководство пользователя

Результаты поиска

Содержание ProBook 430 G2

Отзывы:

Похожие инструкции для ProBook 430 G2

Бренды по названию

Популярные бренды