HP ProBook 430 G2 Скачать руководство пользователя страница 84

Страница: 84 / 98

NOTE:

After a message on the screen reports a successful installation, you can delete the

downloaded file from your hard drive.

Using MultiBoot

About the boot device order

As the computer starts, the system attempts to boot from enabled devices. The MultiBoot utility,

which is enabled at the factory, controls the order in which the system selects a boot device. Boot

devices can include optical drives, diskette drives, a network interface card (NIC), hard drives, and

USB devices. Boot devices contain bootable media or files that the computer needs to start and

operate properly.

NOTE:

Some boot devices must be enabled in Computer Setup before they can be included in the

boot order.
You can change the order in which the computer searches for a boot device by changing the boot

order in Computer Setup. You can also press

esc

while the “Press the ESC key for Startup Menu”

message is displayed at the bottom of the screen, and then press

. Pressing

displays a menu

that shows the current boot devices and allows you to select a boot device. Or, you can use MultiBoot

Express to set the computer to prompt you for a boot location each time the computer turns on or

restarts.

Choosing MultiBoot preferences

You can use MultiBoot in the following ways:

●

To set a new boot order that the computer uses each time it is turned on, by changing the boot

order in Computer Setup.

●

To dynamically choose the boot device, by pressing

esc

while the “Press the ESC key for

Startup Menu” message is displayed at the bottom of the screen, and then pressing

to enter

the Boot Device Options menu.

●

To use MultiBoot Express to set variable boot orders. This feature prompts you for a boot device

each time the computer is turned on or restarted.

Setting a new boot order in Computer Setup

To start Computer Setup and set a boot device order that the computer uses each time it is turned on

or restarted, follow these steps:

Turn on or restart the computer, and then press

esc

while the “Press the ESC key for Startup

Menu” message is displayed at the bottom of the screen.

Press

f10

to enter Computer Setup.

Use a pointing device or the arrow keys to select one of the following options:

●

Advanced > Boot Options > UEFI Boot Order > UEFI Hybrid

●

Advanced > Boot Options > UEFI Boot Order > UEFI Native Boot mode

●

Advanced > Boot Options > Legacy Boot Order > Legacy Boot Mode

Press

enter

74 Chapter 12 Computer Setup (BIOS), MultiBoot, and HP PC Hardware Diagnostics (UEFI)

Содержание ProBook 430 G2



































































































Результаты поиска

Содержание ProBook 430 G2

Отзывы:

Похожие инструкции для ProBook 430 G2

Бренды по названию

Популярные бренды

HP ProBook 430 G2, Руководство пользователя

Результаты поиска

Содержание ProBook 430 G2

Отзывы:

Похожие инструкции для ProBook 430 G2

Бренды по названию

Популярные бренды