HP ProBook 430 G2 Скачать руководство пользователя страница 53

Страница: 53 / 98

Replacing a user-replaceable battery

Battery Check notifies you to replace the battery when an internal cell is not charging properly or

when the battery storage capacity has reached a weak condition. If the battery is possibly covered by

an HP warranty, instructions include a warranty ID. A message refers you to the HP website for more

information about ordering a replacement battery.

Using external AC power

WARNING!

Do not charge the computer battery while you are onboard aircraft.

WARNING!

To reduce potential safety issues, use only the AC adapter provided with the computer,

a replacement AC adapter provided by HP, or a compatible AC adapter purchased from HP.

NOTE:

For information on connecting to AC power, see the

Setup Instructions poster provided in

the computer box.
External AC power is supplied through an approved AC adapter or an optional USB docking or

expansion device.
Connect the computer to external AC power under any of the following conditions:

●

When charging or calibrating a battery

●

When installing or modifying system software

●

When writing information to a CD, a DVD, or a BD (select models only)

●

When running Disk Defragmenter

●

When performing a backup or recovery

When you connect the computer to external AC power, the following events occur:

●

The battery begins to charge.

●

If the computer is turned on, the power meter icon in the notification area changes appearance.

When you disconnect external AC power, the following events occur:

●

The computer switches to battery power.

●

The display brightness is automatically decreased to save battery life.

Testing an AC adapter

Test the AC adapter if the computer exhibits any of the following symptoms when it is connected to

AC power:

●

The computer does not turn on.

●

The display does not turn on.

●

The power lights are off.

To test the AC adapter:

NOTE:

The following instructions apply to computers with user-replaceable batteries.

Shut down the computer.

Remove the battery on the computer.

Setting power options 43

Содержание ProBook 430 G2



































































































Результаты поиска

Содержание ProBook 430 G2

Отзывы:

Похожие инструкции для ProBook 430 G2

Бренды по названию

Популярные бренды

HP ProBook 430 G2, Руководство пользователя

Результаты поиска

Содержание ProBook 430 G2

Отзывы:

Похожие инструкции для ProBook 430 G2

Бренды по названию

Популярные бренды