8.
Disconnect the fan cable from the system board
(2)
, and then remove the fan from the computer.
To install the fan, reverse the removal procedures.
Thermal module
1.
Prepare the computer for disassembly (see
Preparing to disassemble the computer on page 5
).
2.
Remove the stand (see
Stand on page 11
).
3.
Remove the hard drive (see
Hard drive on page 13
).
4.
Remove the optical drive (see
Optical drive on page 16
).
5.
Remove the back cover (see
Back cover on page 18
).
6.
Remove the system board shield (see
System board shield on page 19
).
7.
Remove the fan (see
Fan on page 22
).
8.
Loosen the captive screws from the thermal module, as follows:
a.
(1)
Two screws for the chipset heat sink
b.
(2)
Four screws for the processor heat sink
c.
(3)
Two screws for the graphics card heat sink
Thermal module
23
Содержание Pavilion MS218
Страница 1: ......
Страница 2: ...Maintenance and Service Guide HP Pro All in One ms218 219 ...
Страница 5: ...iv About This Book ...
