HP P4800 G2 Скачать руководство пользователя страница 2

Страница: 2 / 52

The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express

warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall

not be liable for technical or editorial errors or omissions contained herein.

Acknowledgments

Microsoft® Windows® is a U.S. registered trademark of Microsoft Corporation.

Warranty

To obtain a copy of the warranty for this product, see the warranty information website:

http://www.hp.com/go/storagewarranty

Revision History

July 2010

Revision 1

First edition

November 2010

Revision 2

Second edition—Updated with changes for the SAN/iQ software 9.0 release.

March 2011

Revision 3

Third edition—Applied branding changes to product and server blade names. The product name changed from P4000 BladeSystem for SAN

Solutions to P4000 G2 SAN Solution for BladeSystem. The server blade changed from the BL460c G6 to the BL460c G7 (G2 server blade). The

G2 server blade name is P4460sb.

September 2011

Revision 4

Fourth edition—Changed Quick Restore references from a CD to an .iso image.

Содержание P4800 G2





















































Результаты поиска

Содержание P4800 G2

Отзывы:

Похожие инструкции для P4800 G2

Бренды по названию

Популярные бренды

HP P4800 G2, Руководство по обслуживанию

Результаты поиска

Содержание P4800 G2

Отзывы:

Похожие инструкции для P4800 G2

Бренды по названию

Популярные бренды