HP Omnibook XE3 Скачать руководство пользователя страница 109

Страница: 109 / 188

Using Windows 2000

Installing Retail Windows 2000

Corporate Evaluator’s Guide

109

To install touchpad support

If a retail version of Windows 2000 is installed, the touchpad support must be added.

This driver is located on the Recovery CD in \HP\DRIVERS\TOUCHPAD.

Double-click \HP\DRIVERS\TOUCHPAD\SETUP.EXE.

Choose appropriate language, then click OK.

Click Next at the Welcome screen, then click Next again.

Click Next to accept Current Settings.

Click “No, I will restart my computer later.” and click Finish. Continue installing
other drivers.

To install the Intel® SpeedStep™ technology applet

If you’ve installed a retail version of Windows 2000, you’ll need to install the Intel®
SpeedStep™ technology applet if you have a dual-speed Pentium III processor.

The Intel SpeedStep files are located on the Recovery CD in \HP\DRIVERS\SPEEDSTP.

Double-click \HP\DRIVERS\SPEEDSTP\SETUP.EXE.

Click Next in the “Welcome” window, then Yes to accept the license agreement.

Click “No, I will restart my computer later.” and click Finish. Continue installing
other drivers.

To install infrared support

Remove the Recovery CD, reboot the computer, and press F2 during boot to enter the
BIOS setup.

Use the arrow keys to go to “System Devices” then highlight the “Infrared Port”.

Set the infrared port to “Enabled”, and the Mode to “FIR”.

Save changes and exit.

When the system reboots, Windows 2000 will detect new hardware and install the
necessary drivers.

Содержание Omnibook XE3





























































































































































































Результаты поиска

Содержание Omnibook XE3

Отзывы:

HP Omnibook XE3, Руководство оценщика, Страница: 109 / 188

Результаты поиска

Содержание Omnibook XE3

Отзывы: