HP Omnibook XE3 Скачать руководство пользователя страница 107

Страница: 107 / 188

Using Windows 2000

Installing Retail Windows 2000

Corporate Evaluator’s Guide

107

To install chipset support

The driver is located on the Recovery CD in \HP\DRIVERS\830M.

Double-click \HP\DRIVERS\830M\SETUP.EXE.

Click Next in the “Welcome…” window.

Click Yes to accept the license agreement, then Next in the “Readme…” window.

Remove the Recovery CD and click Finish to complete the setup and reboot the HP
notebook.

To install video support

The driver is located on the Recovery CD in \HP\DRIVERS\VIDEO.

Double-click \HP\DRIVERS\VIDEO\SETUP.EXE.

Click Next in the “Welcome to the InstallShield…” window.

Click Yes to accept the license agreement.

Remove the Recovery CD and click Finish to complete the setup and reboot the HP
notebook. Adjust your display settings as necessary after rebooting.

To install audio support

The driver is located on the Recovery CD in \HP\DRIVERS\AUDIO.

Double-click \HP\DRIVERS\AUDIO\ESSETUP.EXE.

Click Next on the Allegro Welcome screen.

Click “No, I will restart my computer later.” and click Finish. Continue installing
other drivers.

Содержание Omnibook XE3





























































































































































































Результаты поиска

Содержание Omnibook XE3

Отзывы:

HP Omnibook XE3, Руководство оценщика, Страница: 107 / 188

Результаты поиска

Содержание Omnibook XE3

Отзывы: