HP OmniBook 2100 Скачать руководство пользователя страница 67

Страница: 67 / 129

Making Connections

Connecting External Devices

4-9

To indentify the external ports

The following graphic describes the available connectors for external devices. Refer
to it, if necessary, when following the procedures in this section.

1. Infrared port. Use this port for wireless data transmission between the OmniBook

and another computer or a printer with an infrared port. You must install
infrared drivers. Windows NT 4.0 does not support infrared communication.

2. Universal Serial Bus port (USB).

3. Serial port (COM1).

Use this port for a serial mouse, a modem, or a serial printer.

4. Parallel port (LPT1).

Use this port for a parallel printer.

5. System-off button (to reset the OmniBook).

6. External monitor port.

7. Docking port.

8. PS/2 keyboard or PS/2 mouse port.

Содержание OmniBook 2100


































































































































Результаты поиска

Содержание OmniBook 2100

Отзывы:

HP OmniBook 2100, Справочное руководство, Страница: 67 / 129

Результаты поиска

Содержание OmniBook 2100

Отзывы: