HP ntegrity iLO 2 MP Скачать руководство пользователя страница 80

Страница: 80 / 199

TE <text> [ -nc ]
-?

UC: User Configuration (users, passwords, and so on)

Command access level: User administration access

adds, modifies, re-enables, or deletes any of the following user parameters:

•

Password

•

User Name

•

User Workgroup

•

User Access Rights

•

User Operating Mode

•

User Enabled

There are two default users,

Admin

and

Oper

. The

Admin

user has all rights

(C, P, M, U,

and V)

. The

Oper

user has the console access right by default. You can change the configuration

of these default users with the

command.

All users have the right to log in to the iLO 2 MP and to run Status (Read-only) commands (view
event logs, check system status, power status, and so on), but not to run any commands that alter
the state of the iLO 2 MP or the system.

The following commands are available to all users:

DATE

SYSREV

VFP

WHO

(status options)

An iLO 2 MP user can also have any or all of the following rights:

Console Access

Right to access the system console (the host OS). This does
not bypass host authentication requirements, if any.

Command:

Power Control Access

Right to power on, power off, or reset the server, and to
configure the power restore policy.

Commands:

Local User Administration Access

Right to configure locally stored user accounts.

Commands:

iLO 2 MP Configuration Access

Right to configure all iLO 2 MP settings (and some system
settings, such as the power restore policy).

Commands:

LDAP

LOC

Virtual Media Access

Enables Advanced Pack license users the right to use the
vMedia applet.

NOTE:

The vMedia feature is available only if you have

the iLO 2 MP Advanced Pack license and the user vMedia
access right.

Command line usage and scripting:

Using iLO 2 MP

Содержание ntegrity iLO 2 MP








































































































































































































Результаты поиска

Содержание ntegrity iLO 2 MP

Отзывы:

Похожие инструкции для ntegrity iLO 2 MP

Бренды по названию

Популярные бренды

HP ntegrity iLO 2 MP, Руководство по эксплуатации

Результаты поиска

Содержание ntegrity iLO 2 MP

Отзывы:

Похожие инструкции для ntegrity iLO 2 MP

Бренды по названию

Популярные бренды