HP ntegrity iLO 2 MP, Руководство по эксплуатации

Страница: 126 / 199

</>hpiLO->
If an invalid target is specified, the response differs as follows:
</> hpiLO-> show /badtarget1
status=3
status_tag=COMMAND PROCESSING FAILED
error_tag=COMMAND SYNTAX ERROR
‘/badtarget1’ is an invalid target.
</>hpiLO->
SM CLP Syntax
The following sections provide terms, descriptions, and examples of the SM CLP syntax.
Command Line Terms
The command syntax consists of a command verb, options, target address, and properties. The
general syntax of the SM CLP command is as follows:
<verb> <options> <target> <properties>
Where:
<verb> The command verb.
<options> Selections that affect the action, behavior, or output of the verb.
<target> The implicitly or explicitly-identified managed element the command is
directed to.
<properties> Attributes of the target relative to the command execution.
Command Verbs
Command verbs select a management action for target.
The command verbs listed in Table 6-29 consist of several reserved words in the following
categories:
Retrieve Information cd, help, show, version
Configure a target create, delete, load, set
Change target state exit, reset, start, stop
Table 6-29 lists the supported command verbs.
Table 6-29 Supported Command Verbs
Action Command
Changes the current default target.
The root of the CLP target namespace is
/
, and this is the starting point for a CLP system. By changing
the current default target by running
cd <some target>
, you can shorten commands.
For example, to find the current MP firmware version, run the command
show
/map1/swinventory1/swid1
. However, if you run the
cd /map1/swinventory1/swid1
command, the
show
command displays the information.
cd
Creates a new instance of an object. create
Deletes an instance of a target object. delete
Terminates the SM CLP session. exit
126 Using iLO 2 MP