Preparing to Set Up iLO 2 MP
Perform the following tasks before you configure the iLO 2 MP LAN:
•
Determine the physical access method to select and connect cables.
•
Determine the iLO 2 MP LAN configuration method and assign an IP address if necessary.
Determining the Physical iLO 2 MP Access Method
Before you can access the iLO 2 MP, you must determine the correct physical connection method.
The iLO 2 MP has a separate LAN port from the system LAN port. It requires a separate LAN
drop, IP address, and networking information from that of the operating system LAN port. See
Figure 2-3
and
Figure 2-4 (page 30)
and use
Table 3-2
to determine your physical connection
method.
Table 3-2
lists the appropriate connection method, required connection components, and
connectors to the host console.
Table 3-2 Physical Connection Matrix
Required Connection Components
Connection Method
• Host console
• Console serial port (RS-232) DB-9F to DB-9F cable (modem eliminator cable)
• Emulation terminal device (for example, a PC, laptop, or ASCII terminal)
Console serial port
(RS-232)
10/100 LAN cable
LAN port
Determining the iLO 2 MP LAN Configuration Method
To access the iLO 2 MP through the iLO 2 MP LAN, the iLO 2 MP must acquire an IP address.
The way the iLO 2 MP acquires an IP address is dependent upon whether DHCP is enabled or
disabled on the server, and if DHCP and DNS services are available to the server (see
Table 3-3
).
Once you have determined the iLO 2 MP access method, you must determine how you will
configure the iLO 2 MP LAN in order to acquire an IP address using the following methods:
•
DHCP/DNS through the management LAN: use the DNS name on the toe-tag on the server.
•
Setting up a static IP number using a laptop with DHCP services and the management LAN.
•
ARP Ping to set a static IP using a laptop and the management LAN
•
Local RS-232 serial port and a serial console.
Table 3-3
provides all the possible IP address acquisition scenarios. Use this table to help you
select the appropriate LAN configuration method to obtain an IP address.
Table 3-3 LAN Configuration Methods
LAN Configuration Method
Console Serial Port (RS-232)
DNS
DHCP
DHCP
No
Yes
Yes
DHCP or console serial port
Yes
Yes
Yes
ARP Ping
No
No
No
ARP Ping
No
Yes
No
ARP Ping or console serial port
Yes
Yes
No
Console serial port
Yes
No
Yes
Console serial port or ARP Ping
Yes
No
No
Cannot set up the LAN; reconsider your criteria
No
No
Yes
36
Setting Up and Connecting the Console
Содержание ntegrity iLO 2 MP
