HP ntegrity iLO 2 MP Скачать руководство пользователя страница 124 | Manualshive

Страница: 124 / 199

HP ntegrity iLO 2 MP Скачать руководство пользователя страница 124

•

CLP sessions are independent from each other and nonmirrored.

•

Provides a subset of MP CLI commands.

•

Provides access to the

MP Main Menu

interface and system console interface.

SM CLP Session

Sessions between a client and an SM CLP service are established over a transport protocol. Once
the session is authenticated, the client begins to submit commands using the SM CLP service.

The CLP is a command and response protocol (not a command-line interface). Each CLP command
is sent over the transport protocol to the iLO 2 MP. The command is received and processed by
the iLO 2 MP, which then transmits a response back to the CLP client. There are no interactive
commands, so no state information is retained.

The privilege level of the logged-in user is checked against the privilege required for the command.
The command is run only if a user has the privilege level required for that command.

Accessing the SM CLP Interface

When you log in to the iLO 2 MP, by default you access the

MP Main Menu

interface. To use the

SM CLP, follow these steps:

1.

Access the

MP Main Menu

.

2.

At the

MP Main Menu

, enter

SMCLP

to access SM CLP. The screen displays the SM CLP

hpiLO->

prompt.

MP MAIN MENU:

CO: Console
VFP: Virtual Front Panel
CM: Command Menu
SMCLP: Server Management Command Line Protocol
CL: Console Log
SL: Show Event Logs
HE: Main Help Menu
X: Exit Connection

[hqgstlv7] MP>
[hqgstlv7] MP> SMCLP

HP SMASH SM CLP interface.

Type "help" to display all supported commands.
Type "show" to display information about the current target.
Type "start /map1/textredirectsap1" to switch to iLO Main Menu interface.

=== SMCLP v1.0.0 Hewlett-Packard Company ===

</> hpiLO->

Exiting the SM CLP Interface

To terminate an SM CLP session and disconnect from the iLO 2 MP, use the

exit

command. To

switch from SM CLP to the

MP Main Menu

interface, use the

start /map1/textredirectsap1

command.

Changing the iLO 2 Default Interface to SM CLP

iLO 2 MP has a configurable setting that enables you to select your default interface,

MP Main

Menu

or SM CLP.

To change the default interface from

MP Main Menu

to SM CLP, follow these steps:

1.

At the

MP Main Menu

, enter

CM

.

2.

From the

CM

prompt, enter

SA

to modify iLO 2 MP access configuration.

124

Using iLO 2 MP

«
...
122
123
124
125
126
...
»

Содержание ntegrity iLO 2 MP








































































































































































































Отзывы:

Нет отзывов