HP ntegrity iLO 2 MP, Руководство по эксплуатации, Страница: 163 / 199

Directory Services for eDirectory
The following sections provide installation prerequisites, preparation, and a working example
of directory services for eDirectory.
NOTE:
LDAP Lite is not supported with eDirectory.
Installing and Initializing Snap-In for eDirectory
For instructions on using the snap-in installation application, see “Installing and Initializing
Snap-Ins for Active Directory” (page 154) .
NOTE:
After you install snap-ins, restart ConsoleOne and MMC to show the new entries.
Example: Creating and Configuring Directory Objects for Use with iLO 2 MP Devices
in eDirectory
The following example demonstrates how to set up roles and HP devices in a company called
samplecorp, which consists of two regions: region1 and region2.
Assume that samplecorp has an enterprise directory arranged according to that in Figure 7-14 .
Figure 7-14 Roles and Devices Example
Begin by creating organizational units in each region to contain the iLO 2 MP devices and roles
specific to that region. In this example, two organizational units are created, roles and HP devices,
in each organizational unit (region1 and region2).
Creating Objects
To create iLO 2 MP objects, follow these steps:
1. Use the ConsoleOne snap-ins provided by HP to create iLO 2 MP objects in the HP devices
organizational unit for several iLO 2 MP devices.
Directory Services for eDirectory 163