Chapter 4
Diagnostics
41
◊◊◊◊
Remove and reinsert the processor(s) firmly in the sockets on the system board.
◊◊◊◊
Remove and reinsert the DIMMs firmly and correctly in the slots.
Clearing the CMOS Configuration
You may need to clear the CMOS configuration if the configuration has been corrupted, or if incorrect
settings made in the
Setup Utility
have caused error messages to be unreadable.
To clear the configuration:
1. Turn off power to the Netserver and remove the cover.
2. Move switch 4 in the configuration switch on the system board (labeled "Clear CMOS") to the
ON position.
3. Turn on power to the Netserver.
A message displays indicating the configuration has been cleared.
4. Turn off power to the Netserver.
5. Return switch 4 on the system board to the OFF position.
6. Replace the cover.
7. Turn on power to the Netserver and the following message displays:
Incorrect System Configuration
8. Press
[F2]
to run the
Setup Utility
when
<
F2=Setup
>
appears.
9. Make any configuration changes required.
10. Choose the Exit option and save the changes to save the configuration and exit the
Setup
Utility
.
Configuration Switch
Spring Latch
Battery
Switch 1 Position
Configuration Switch Location