125
6 Tests and Error Messages
Order in Which POST Tests Are Performed
F1h
Initialize Run Time Clock
F2h
Initialize video
F3h
Initialize System Management Mode
F4h
1
Output one beep before boot
F5h
Boot to Mini DOS
F6h
Clear Huge Segment
F7h
Boot to Full DOS
1.
If the BIOS detects error 2C, 2E, or 30 (base 512K RAM error), it displays an additional word-bitmap
(
xxxx
) indicating the address line or bits that failed.For example:
“2C 0002” means line 1 (bit one set) has failed.
“2E 1020” means data bits 12 and 5 (bits 12 and 5 set) have failed in the lower 16 bits.
The BIOS also sends the bitmap to the port-80 LED display. It first displays the checkpoint code,
followed by a delay, the high-order byte, another delay, and then the low-order byte of the error. It
repeats this sequence continuously.
Checkpoint
Code
Beeps
POST Routine Description
Содержание KAYAK XM600
Страница 1: ...HP Kayak XM600 PC Workstation Technical Reference Manual ...
Страница 32: ...32 1 System Overview Documentation ...
Страница 90: ...90 3 Interface Cards SCSI Adapter Card ...
Страница 138: ...138 7 Connectors and Sockets Rear Panel Socket Pin Layouts ...