HP KAYAK XM600, Техническое справочное руководство

Страница: 113 / 138

113
6 Tests and Error Messages
MaxiLife Test Sequence and Error Messages
The following table shows the test sequence carried out, the type of error
message, and the action to take.
Post Test Sequence and Post Error
In this phase, MaxiLife waits for any error messages that the BIOS may
issue. If such an error occurs, then an error code is displayed on the monitor
screen.
On the HP Kayak XM 600 Minitower PC Workstation , a screen similar to
the following example is displayed. The error code that appears on the LCD
status panel is the same as the one that appears on the monitor screen. If
the POST issues several error codes, only the last one is visible on the LCD
status panel.
The following diagrams show the different BIOS-generated errors.
Test Error Code Action to Take
Presence of either a processor or processor
terminator CPU SOCKET Check that the processor(s), processor terminator are correctly
installed.
Control of some voltages: 12V, 3.3V, 1.8V, 2.5V POWER SUPPLY Check the power supply cable and connectors, and processor.
Check the system board clock generators (PLL). BOARD PLL 1 Check that the system board is connected
2 Replace the system board (PLL clock generator).
POST XXXX
ERROR
BIOS
LCD Status Panel
System Memory
There is a time-out of 3 seconds before
the message is displayed on the LCD
status panel and video display.
“read system memory”
MaxiLife
“Spy System
Memory”
“BIOS” ERROR
BIOS
ERROR