HP Integrity rx1620, Руководство по эксплуатации

Страница: 68 / 136

Chapter 4
Utilities
Management Processor Command Interface
68
Display FRUID
DF
: Display FRUID information
This command displays FRUID information from the BMC for FRU devices. Information provided includes
serial number; part number; model designation; name and version number; and manufacturer.
Disconnect Remote or LAN Console
DI
: DIsconnect remote/modem or LAN/WEB console
This command disconnects (hang up) the remote/modem or LAN/WEB users from MP. It does not disable the
ports. The remote console is no longer mirrored.
MP Firmware Update
FW
: Activates MP firmware upgrade mode
This command is available from either the LAN or local serial port. This command activates firmware
upgrade mode, which loads new firmware through the MP LAN by FTP (which must be operational). An MP
Reset is generated after the upgrade is complete.
Help
HE
: Display help for menu or command
This command displays the MP hardware and firmware version identity, and the date and time of firmware
generation. If executed from the MP Main Menu, general information about the MP, and those commands
displayed in the MP Main Menu, will be displayed. If executed in command mode, this command displays a
list of command interface commands available to the user. It also displays detailed help information in
response to a topic or command at the help prompt.
Display System ID
ID
: Display/modify system information
This command allows the user to display and modify the following:
• SNMP contact information
• SNMP server information
• SPU hostname
Inactivity Timeout
IT
: Inactivity Timeout settings
The session inactivity timeout is up to 1,440 minutes—default is 60 minutes. This timeout prevents sessions
to the system from being inadvertently left open. A session can be started by the
SE
command. An open
session can prevent users from logging onto the MP through a port and can also prevent system applications
from initiating an outbound connection.
MP inactivity timeout is up to 1,440 minutes—default is 5 minutes. This timeout prevents a user from
inadvertently keeping the MP locked in a MP Command Interface mode preventing other users from looking
at the console output. The MP Command Interface inactivity. timeout may not be deactivated.