manualshive.com logo in svg

HP HP-UX SNAplus2, Руководство администратора, Страница: 289 / 398

Поделиться
Скачать
HP HP-UX SNAplus2 Скачать руководство пользователя страница 289

Chapter 11

289

Managing SNAplus2 Clients

Managing Win16 Clients

This parameter is optional. If it is not specified, the
default is

100000

 (bytes).

truncation_length

The maximum length, in bytes, of the information
written to the trace file for each message. If a message
is longer than this, SNAplus2 writes only the start of
the message to the trace file, and discards the data
beyond truncation_length. This enables you to record
the most important information for each message but
avoid filling up the file with long messages.
This parameter is optional. If it is not specified,
SNAplus2 does not truncate messages (all the data
from each message is written to the file).

all_api

To trace messages for all APIs, set this parameter to

YES

. In this case, SNAplus2 ignores the parameters

from appc through nof.
To disable tracing for all APIs, set all_api and all of the
parameters from appc through nof to

NO

.

To trace only messages for specific APIs, set all_api to

NO

, and use the parameters from appc through nof to

indicate which APIs to trace.
This parameter is optional. If it is not specified, the
default is

NO

.

appc

To trace APPC API messages, set this parameter to

YES

; otherwise, set it to

NO

.

This parameter is optional. If it is not specified, the
default is

NO

. If the all_api parameter is set to

YES

,

this parameter is ignored, and APPC messages are
traced.

cpic

To trace CPI-C API messages, set this parameter to

YES

; otherwise, set it to

NO

.

This parameter is optional. If it is not specified, the
default is

NO

. If the all_api parameter is set to

YES

,

this parameter is ignored, and CPI-C messages are
traced.

csv

Содержание HP-UX SNAplus2















































































































































































































































































































































































































Отзывы:

Нет отзывов