manualshive.com logo in svg

HP HP-UX SNAplus2, Руководство администратора, Страница: 200 / 398

Поделиться
Скачать
HP HP-UX SNAplus2 Скачать руководство пользователя страница 200

200

Chapter 7

Configuring APPC Communication

Defining CPI-C Side Information

Defining CPI-C Side Information

If you are supporting a CPI-C application that uses CPI-C symbolic
destination names, you need to define the CPI-C side information. The
side information associates the symbolic destination name with
information about the partner TP, partner LU, mode, and security for the
conversation.

To determine the symbolic destination name for CPI-C, consult the
application developer (or for a third-party application, consult the
product documentation).

To configure CPI-C side information, use one of the following methods:

Motif administration program

Select

APPC

 and

CPI-C

 from the

Services

 menu on

the Node window.

Command-line administration program

Issue the following command:

define_cpic_side_info

CPI-C Configuration Parameters

For each CPI-C symbolic destination name used by the application,
collect the following information:

Name

The symbolic destination name used by the CPI-C
applications (also known as TPs) that you want to run.
This name can be 1–8 characters in length.
The application developer (or for a third-party
application, the product documentation) can provide
this name.

Local LU

The local LU for any conversations initiated by TPs
using this side information using one of the following
methods:
Local LU alias
An alias for a local LU.
Use default LU

Содержание HP-UX SNAplus2















































































































































































































































































































































































































Отзывы:

Нет отзывов