manualshive.com logo in svg

HP HP-UX SNAplus2, Руководство администратора, Страница: 211 / 398

Поделиться
Скачать
HP HP-UX SNAplus2 Скачать руководство пользователя страница 211

Chapter 8

211

Configuring User Applications

Overview

Step 1. For a 3270 display or printer, define a dependent LU as described in

“Defining LU Types 0–3”.

Step 2. To enable 3270 displays to select from a pool of LUs, define an LU pool as

described in “Defining LU Pools”. If a display uses a dedicated LU, you
can skip this step.

Step 3. Define emulator users (or groups of users) and 3270 emulator sessions as

described in “Configuring 3270 Users and Sessions”.

SNAplus2 provides 3270 emulation software that
enables you to log on to and use SNA host systems from
your HP-UX computer. Using this software, you can
transfer files between the local and host computers,
and control display and printer emulation sessions. You
can customize some of the 3270 emulation features,
such as key mapping and display attributes. SNAplus2
3270 emulation also enables you to use HLLAPI
applications.

5250 applications

For 5250 communication, configure the following
resources:

Step 1. Configure the node for APPC communication:

a. If you can use the local node's control point LU, you

do not need to configure a local LU. If you need a
local LU definition (for example, to use session
security), define the local LU as described in
“Defining Local LUs”.

b. If the local node is a LEN node, youmust define the

AS/400 system as a remote node as described in
“Defining Remote Nodes”.

If the local node is an APPN end node, you can use
the control point LU on the AS/400 system as a
partner LU, so you do not need to configure any
other partner LUs.

You do not need to define any modes, because 5250 uses
the standard mode

QPCSUPP

.

Step 2. Define emulator users (or groups of users) as described in “Configuring

5250 Users”.

Содержание HP-UX SNAplus2















































































































































































































































































































































































































Отзывы:

Нет отзывов