manualshive.com logo in svg

HP HP-UX SNAplus2, Руководство администратора, Страница: 278 / 398

Поделиться
Скачать
HP HP-UX SNAplus2 Скачать руководство пользователя страница 278

278

Chapter 11

Managing SNAplus2 Clients

Managing Win16 Clients

password, or if the user name and password cannot be matched with a
user name and password on the server, the server rejects the client's
access attempt.

To stop using Win16 client security, so that any Win16 client user can
access SNAplus2 servers without having to specify a password, use the
following command:

snapwinsec off

This command removes Win16 client security on all servers in the
SNAplus2 domain. You do not need to repeat the command on other
servers.

Win16 Client Initialization File (sna.ini)

For Windows 3.1 or Windows for Workgroups 3.11, configuration
information is kept in the

sna.ini

 file.

The Win16 client initialization file,

sna.ini

, contains SNA network

information (similar to the information held in the client network data
file on HP-UX clients). This file also contains some additional
configuration information that is specific to Win16 clients. This file is
stored in the directory where the Windows software was installed
(typically

c:\windows

); it is set up during the client installation process,

and is an ASCII text file that can be modified later as required using a
standard text editor.

The contents of the file are as follows:

[Configuration]
domain =

domain_name

snauser =

user_name

snagroup =

group_name

invoked_tps = YES | NO
lan_access_timeout =

nn

broadcast_attempt_count =

nn

server_lost_timeout =

nn

[Servers]
Server1 = * |

servername1

Server2 =

servername2

   .
   .
   .
Server10 =

servername10

[Logging]
exception_logging_enabled = YES | NO
audit_logging_enabled = YES | NO
log_directory =

directory

error_file =

error_filename

Содержание HP-UX SNAplus2















































































































































































































































































































































































































Отзывы:

Нет отзывов