manualshive.com logo in svg

HP HP-UX SNAplus2, Руководство администратора, Страница: 123 / 398

Поделиться
Скачать
HP HP-UX SNAplus2 Скачать руководство пользователя страница 123

Chapter 3

123

Administering SNAplus2

Using the Motif Administration Program

list of associated link stations is shown or hidden. Similarly, link stations
with a list of associated LUs can be expanded to show the LUs, or
contracted to hide them.

A parent resource must always be configured before its child resources,
and deleting the parent resource causes all its child resources to be
deleted too.

Tool Bar Buttons

Resource windows include tool bar buttons to make it easy to perform
common functions. A tool bar for SNAplus2 is shown in Figure 3-3,
“SNAplus2 Tool Bar.”

Figure 3-3

SNAplus2 Tool Bar

Not all buttons appear in the tool bars of each resource window. If a
button's operation is not valid for the currently selected item (or an
operation requires an item to be selected, but none is), the outline of the
button is displayed in gray, and the function cannot be selected (the
button cannot be pressed). The following buttons can appear on resource
windows:

Start

Starts the selected item.

Stop

Stops the selected item.

Add

Adds a new resource item. (In the Node window, you
add a resource into the selected pane.)

Delete

Deletes the selected resources.

Zoom

Opens the dialog for the selected item to view or modify
the item's configuration.

Copy

Copies the selected item. Pressing this button opens a
dialog whose fields duplicate the configuration of the
selected item. Complete the dialog's fields (filling in the
new item's name) to add the new resource.

Status

Displays the current status of the selected item.

Содержание HP-UX SNAplus2















































































































































































































































































































































































































Отзывы:

Нет отзывов