manualshive.com logo in svg

HP HP-UX SNAplus2, Руководство администратора, Страница: 228 / 398

Поделиться
Скачать
HP HP-UX SNAplus2 Скачать руководство пользователя страница 228

228

Chapter 9

Configuring Passthrough Services

Configuring TN Server

If you want a TN3270 client to be able to use more than
one LU or LU pool, define multiple access records, each
with a different TCP/IP port number, so that you can
identify the different LUs or LU pools by specifying
different port numbers.

Display LU assigned

The name of the LU that the TN3270 client accesses
when it is active. The LU must be a dependent LU on
the local node. You can specify the name of an LU pool
rather than the name of a particular LU.

Printer LU assigned

The name of the default printer LU or LU pool for
clients that use this access record. This LU must be
defined as a dependent LU on the local node.

Allow access to specific LU

Specify this option to enable TN3270E and TN3287
clients to request a specific LU for a session. (This
option is not available to TN3270 clients.)

Additional Configuration

After performing the TN server access configuration, continue with the
following configuration tasks:

• Configure TN server association records as described in “Configuring

TN Server Association Records”.

• To configure PU concentration, see “Configuring PU Concentration”.

• To configure DLUR, see “Configuring DLUR”.

• To configure user applications, see Chapter 8, “Configuring User

Applications.”

Configuring TN Server Association Records

A TN server association record defines an association between a printer
LU and display LU, so that the TN3270E or TN3287 protocol can connect
the two. If the access record for the client permits selection of a specific
LU, this record enables a client to select a specific printer by specifying
the associated display LU.

To configure a TN server association record, use one of the following
methods:

Содержание HP-UX SNAplus2















































































































































































































































































































































































































Отзывы:

Нет отзывов