HP HP-UX SNAplus2 Скачать руководство пользователя страница 171

Страница: 171 / 398

Chapter 6

171

Configuring Dependent LUs

Defining LU Types 0–3

Whether the LU is assigned to an LU pool. Only
printer, display, and unrestricted (unknown) LUs can
be members of a pool.

Pool name

The name of the LU pool.

Additional Configuration

After performing the LU type 0–3 configuration, continue with the
following configuration tasks:

• To use a pool of dependent LUs for a 3270 display, for TN3270, for

RJE, or for LUA, define the LU pool as described in “Defining LU
Pools”.

• For 3270, define emulator users as described in “Configuring 3270

Emulator Users”.

• For RJE, define the RJE workstation as described in “Configuring

RJE Workstations”.

• For TN3270, define TN3270 client access records as described in

“Configuring TN Server”.

Содержание HP-UX SNAplus2














































































































































































































































































































































































































Результаты поиска

Содержание HP-UX SNAplus2

Отзывы:

HP HP-UX SNAplus2, Руководство администратора, Страница: 171 / 398

Результаты поиска

Содержание HP-UX SNAplus2

Отзывы: